R:990209/0254Z @:NL3DAV.ZH.NLD.EU #:44433 [Leiderdorp] FBB7.00f $:102-R0CK
R:990208/0444Z @:NL3ZMR.ZH.NLD.EU #:39283 [Zoetermeer] FBB7.00g $:102-R0CK
R:990207/1250Z @:NL3LDM.ZH.NLD.EU #:1470 [L.dam] FBB7.00f $:102-R0CK
R:990206/2345Z @:NL3RTD.ZH.NLD.EU #:48673 [Rotterdam-Noord] $:102-R0CK
R:990206/0830Z @:NL3IPR.IPR.NLD.EU #:46481 [IPR] FBB7.00g $:102-R0CK
R:990205/1243Z @:BE1BBS.ZL.NLD.EU #:59963 [Middelburg] FBB7.00g $:102-R0CK

From: R0CK@BE1BBS.ZL.NLD.EU
To  : HACK@WW


[¯¯¯ TST HOST 1.43b, UTC diff:5, Local time: Fri Feb 05 12:38:20 1999 ®®®]

Yo Hackerz,



Have Phun with part 6 !!!



IRIS-      IRIS stands for Interactive Real Time Information System.  It orig-
           inally ran on PDP-11's, but now runs on many other minis.  You can
           spot an IRIS by the 'Welcome to "IRIS" R9.1.4 Timesharing' banner,
           and the ACCOUNT ID? prompt.  IRIS allows unlimited tries at hacking
           in, and keeps no logs of bad attempts.  I don't know any default
           passwords, so just try the common ones from the password database
           below.
           Common Accounts:
           MANAGER
           BOSS
           SOFTWARE
           DEMO
           PDP8
           PDP11
           ACCOUNTING

VM/CMS-    The VM/CMS operating system runs in International Business Machines
           (IBM) mainframes.  When you connect to one of these, you will get
           message similar to 'VM/370 ONLINE', and then give you a '.' prompt,
           just like TOPS-10 does.  To login, you type 'LOGON '.
           Common Accounts/Defaults are:
           AUTOLOG1:            AUTOLOG or AUTOLOG1
           CMS:                 CMS
           CMSBATCH:            CMS or CMSBATCH
           EREP:                EREP
           MAINT:               MAINT or MAINTAIN
           OPERATNS:            OPERATNS or OPERATOR
           OPERATOR:            OPERATOR
           RSCS:                RSCS
           SMART:               SMART
           SNA:                 SNA
           VMTEST:              VMTEST
           VMUTIL:              VMUTIL
           VTAM:                VTAM

NOS-       NOS stands for Networking Operating System, and runs on the Cyber
           computer made by Control Data Corporation.  NOS identifies itself
           quite readily, with a banner of 'WELCOME TO THE NOS SOFTWARE
           SYSTEM.  COPYRIGHT CONTROL DATA 1978,1987'.  The first prompt you
           will get will be FAMILY:.  Just hit return here.  Then you'll get
           a USER NAME: prompt.  Usernames are typically 7 alpha-numerics
           characters long, and are *extremely* site dependent. Operator
           accounts begin with a digit, such as 7ETPDOC.
           Common Accounts/Defaults:
           $SYSTEM              unknown
           SYSTEMV              unknown

Decserver- This is not truly a computer system, but is a network server that
           has many different machines available from it.  A Decserver will
           say 'Enter Username>' when you first connect.  This can be anything,
           it doesn't matter, it's just an identifier.  Type 'c', as this is
           the least conspicuous thing to enter.  It will then present you
           with a 'Local>' prompt.  From here, you type 'c ' to
           connect to a system.  To get a list of system names, type
           'sh services' or 'sh nodes'.  If you have any problems, online
           help is available with the 'help' command.  Be sure and look for
           services named 'MODEM' or 'DIAL' or something similar, these are
           often outdial modems and can be useful!

GS/1-      Another type of network server.  Unlike a Decserver, you can't
           predict what prompt a GS/1 gateway is going to give you.  The
           default prompt it 'GS/1>', but this is redifinable by the
           system administrator.  To test for a GS/1, do a 'sh d'.  If that
           prints out a large list of defaults (terminal speed, prompt,
           parity, etc...), you are on a GS/1.  You connect in the same manner
           as a Decserver, typing 'c '.  To find out what systems
           are available, do a 'sh n' or a 'sh c'.  Another trick is to do a
           'sh m', which will sometimes show you a list of macros for logging
           onto a system.  If there is a macro named VAX, for instance, type
           'do VAX'.

           The above are the main system types in use today.  There are
           hundreds of minor variants on the above, but this should be
           enough to get you started.

                         ---=== TO BE CONTINUED ===---


GreetZ

                         
HM Murdock

                         
                         
                         R0CK@BE1BBS.ZL.NLD.EU

 Û\ Û\ ÛßßÛ\ Ûßß Û\ Ü  ßßÛßß\ Û\ Û\ Ûßßß\  ÛßßÛ\ Û\  ÛßßÛ\ Û  Û\ Ûßßß\ ßßÛßß\
 ÛßßÛ\ ÛÜÜÛ\ Û\  ÛÜß\    Û\   ÛßßÛ\ Ûßß\   Ûßßß  Û\  ÛÜÜÛ\ ÛßÜÛ\ Ûßß\    Û\
 Û\ Û\ Û  Û\ ÛÜÜ Û\ßÜ    Û\   Û\ Û\ ÛÜÜÜ   Û\    ÛÜÜ Û  Û\ Û  Û\ ÛÜÜÜ    Û\
                                  
                      E-MAIL: HM_MURDOCK@USA.NET